Riverton Foundation Pros logoRiverton Foundation ProsFoundation Repair · Draper, UT
Patio Lifting photo

Riverton Foundation Pros

Patio Lifting in Draper, UT

Patio lifting in Draper with polyurethane foam injection, dime-sized holes, same-day results, and a free estimate.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Draper and nearby communities.

A sunken patio slab isn't just a tripping hazard, it's usually a sign the soil underneath has washed out or compacted unevenly. Draper's graded hillside lots settle more than older flat-lot neighborhoods, and a patio poured right after construction often sinks at the edges first while the center stays put. Riverton Foundation Pros fixes that with polyurethane foam injection through dime-sized holes, not mudjacking's old mud-slurry mix, which means less weight added to soil that's already shifting.

This is a separate job from driveway or sidewalk lifting even though the method is the same. Patio slabs sit closer to downspouts and landscaping, so drainage slope matters as much as raw height. We check both before we quote.

What's included

What's included with Patio Lifting

Typically included: Slab assessment and height mapping, foam injection through small access holes, slope correction toward existing drainage, hole patching to match the surface.

Optional: Joint resealing across the full patio, extending the drain path if pooling continues after the lift.

Customer prep: Clear furniture, planters, and grills off the patio surface before the crew arrives.

How it works

How our Patio Lifting process works

  1. Patio Assessment photo
    Step 1

    Patio Assessment

    Uneven or settled patio sections are identified for repair.

  2. Access Point Drilling photo
    Step 2

    Access Point Drilling

    Small holes are made at key points across the patio surface.

  3. Foam Injection photo
    Step 3

    Foam Injection

    Expanding material is injected to raise the settled sections.

  4. Level Verification photo
    Step 4

    Level Verification

    Elevation is checked throughout the lifting process for accuracy.

  5. Hole Patching photo
    Step 5

    Hole Patching

    Access points are filled and smoothed to match the patio surface.

  6. Final Walkthrough photo
    Step 6

    Final Walkthrough

    The patio is inspected to confirm a level, stable finish.

Materials

Materials and methods for Patio Lifting

Draper's clay-heavy fill shifts with seasonal moisture, so the lifting material needs to stay flexible without adding dead weight.

  • Polyurethane Foam photo

    Polyurethane Foam

    Lifts patio slabs with minimal disruption to surrounding landscaping, important on lots where sprinkler lines run close to the patio edge.

  • Patch Compound photo

    Patch Compound

    Fills and finishes drilled access holes smoothly so the repair doesn't stand out against older concrete.

  • Joint Filler photo

    Joint Filler

    Restores expansion joints after the lifting process, keeping freeze-thaw cycling from cracking the seam again.

  • Surface Sealant photo

    Surface Sealant

    Guards the patio against moisture and surface wear through Utah's wet springs and dry summers.

  • Leveling Tools photo

    Leveling Tools

    Used to verify consistent elevation across the patio, slab by slab.

  • Bonding Agent photo

    Bonding Agent

    Enhances adhesion between patch material and existing concrete so the fix holds under foot traffic.

Cost

What does a Patio Lifting cost in Draper?

Pricing follows the size of the sunken area and how many access points the lift needs, not a flat per-patio rate. Ask for a free estimate and we'll walk the slab with you before quoting a number.

Project typeTypical rangeWhat’s included
Small single-slab lift$400–$800,one sunken corner or edge raised back to grade.
Multi-slab patio lift$800–$2,000,several adjoining slabs leveled in one visit.
Full patio relevel with drainage correction$2,000–$4,000,larger patios needing slope adjustment toward existing drains.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Timeline

How long does a Patio Lifting take?

Most patio lifts start and finish the same visit, with the surface usable again within hours.

  1. 01

    Consult and assessment

    same day

    .

  2. 02

    Foam injection and lift

    1–3 hours

    depending on patio size.

  3. 03

    Hole patching

    same visit, finishes right after the lift.

  4. 04

    Full cure for foot traffic

    a few hours after patching.

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and codes for Patio Lifting

Permit rules shift by jurisdiction. Confirm with Draper city or Salt Lake County before scheduling if your project crosses into structural changes.

Typically needs a permitOften no permit
Structural patio cover or attached roof modifications tied to the liftStandard polyurethane foam lifting of an existing slab
Any work that changes drainage flow onto a neighboring propertyJoint resealing and surface patching after the lift

DIY vs pro

DIY vs hiring a pro for Patio Lifting

DIYHire a pro
Filling a hairline surface crack with a store-bought concrete patchRaising a sunken slab back to grade, which requires injection equipment most homeowners don't own
Repainting or resealing a patio surface that's already levelCorrecting drainage slope so water doesn't pool against the house
—Any lift where the slab has cracked or separated from an adjoining section

When to call

When to call for Patio Lifting

Call for a free estimate before a small sink turns into a full slab replacement.

  • Standing water pools on the patio after rain instead of draining away
  • One or more slab edges have dropped below the walkway or threshold
  • A slab rocks or flexes underfoot when you step on one corner
  • Cracking has started at a low spot where water collects

FAQs

Patio Lifting FAQs

How much does patio lifting cost in Draper?

Most single-slab lifts run $400–$800. Larger multi-slab patios with drainage correction run higher, usually $2,000–$4,000. We give an exact number after seeing the slab.

Is polyurethane foam cheaper than replacing the patio?

Yes, . Foam injection costs a fraction of tearing out and repouring concrete, and it's usable again the same day instead of waiting on a cure.

How long does the patio need to stay clear after lifting?

A few hours is typical before foot traffic resumes. Heavier furniture or grills can go back once the patching has set, usually later the same day.

Will foam lifting fix the drainage problem too?

It can, if the sink was causing water to pool. We check slope toward existing drains during the lift and correct it where the settlement allowed.

Can I DIY a sunken patio fix?

Surface cracks and resealing are fine to handle yourself. Raising a slab back to grade needs injection equipment and experience reading how much foam to use, which isn't a rental-store job.

What causes a patio to sink in the first place?

Soil compaction under the slab, washed-out fill from poor drainage, or settling fill soil on newer construction. Draper's graded lots see this more than older, undisturbed ground.

Ask about Patio Lifting

Tell us about the project and how to reach you.

Call (385) 600-7881